#ADD USB VIRTUAL PORT WINDOWS 7 DRIVER#
#ADD USB VIRTUAL PORT WINDOWS 7 PC#

#ADD USB VIRTUAL PORT WINDOWS 7 DRIVER#

Right-click on the Brother printer driver and select See What's Printing. If the Status states: Paused or Offline:ДЄ. Status: Printer: Ready (It could also state: Offline, Paused, etc.)Дў. ( Status: 0 document(s) in queue (It could be any number)

While in the Printer's folder, locate the Brother printer in the list and hover your mouse over the Brother printer icon. PART 7: VERIFY THAT THE PRINTER STATUS IS READY AND THE PRINT QUEUE IS EMPTYДЎ. To set your Brother machine as the default printer, right click on the Brother printer driver and select Set As Default (Printer). If the Brother printer is set as the default printer, it will have a check mark in front of the icon. This is especially important if you use the print icon to print from within applications. Verify that the Brother printer is set as default. PART 6: VERIFY THAT THE BROTHER PRINTER IS SET AS DEFAULT If the Brother printer is not listed, the driver may not be installed properly. If the Brother printer is listed, go to PART 6. Verify that the Brother printer in the list. Click Start => Control Panel => Hardware and Sound => Devices and PrintersДў.

PART 5: VERIFY THAT THE PRINTER DRIVER IS INSTALLED Cycle the power to the Brother machine for about 15 seconds.

Important Ensure that the cable is connected to the USB port on the machine and not a Network port or another type of port.Дў. Type A/B 1.1 or 2.0 that is 6 feet (2 meters) or less. Note We recommend that the USB cable supports the following specifications: If you are using a USB hub, remove it and connect directly to the computer. Make sure the interface cable has a secure connection to both the Brother machine and your computer. Disconnect and then reconnect the USB cable from the computer and the Brother machine. PART 4: VERIFY THE CONNECTION OF THE BROTHER MACHINE AND COMPUTERДЎ. If the Print Settings page prints, the problem is isolated to printing from your computer. Clear the printer error before trying to print again. If the Print Settings page does not print, check the machine LEDs for any error messages. Push GO again and hold until the Paper LED is lit by itself and release GO. When the Toner LED is lit by itself release GO.ДҐ. Turn the power switch of the printer back ON while holding down GO.Д¤. Hold down GO on the top of the printer.ДЈ. Turn the printer power switch OFF on the right side of the printer.Дў. If the LEDs display an error, troubleshoot to clear the particular problem.ДЎ. An example would be the Paper or Toner LEDs on. Check the machine LEDs for any error messages. Verify the machine is plugged into a working power outlet and any power switches are turned to the ON position.Дў. PART 1: VERIFY THE STATUS OF THE BROTHER MACHINEДЎ.

There are several basic troubleshooting steps you can take to resolve this issue. This can occur as a result of wrong settings or configuration on the printer driver. The most common reason a Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost.

#ADD USB VIRTUAL PORT WINDOWS 7 PC#

View All Brother Care Program Eligible ProductsДifficulty printing from your PC can occur for various reasons.View All Refurbished - Sewing & Crafting.View All Refurbished - Fax Machines & Scanners.

Add usb virtual port windows 7